![Turbo Jet - Stocks Ag (3) Turbo Jet - Stocks Ag (3)](https://i0.wp.com/www.stocks-ag.co.uk/media/dzceiwkk/turbo-jet-mob-header-1600-x-1060.png?center=0.47573355156593261,0&mode=crop&width=800&height=530&rnd=133020223737870000&format=webp)
The Turbo Jet is a versatile and accurate pneumatic applicator and seeder and will deliver product up to 10m working width. The Turbo Jet 8 has eight outlets and the Turbo Jet 10 has ten outlets.
Commonly used for applying clover seed, full-rate grass reseeds, Avadex, OSR and cover crops, the Turbo Jet can be calibrated to apply precise rates across a wide range of products from 1kg/ha to more than 100kg/ha (dependent on product, working width and forward speed). It can be fitted to a wide variety of machines, from grass harrows to cultivators and rolls, as well as being employed as an additional applicator on a grain drill.
Combining the functionality of other machines with one or multiple Turbo Jets creates a one pass machine, thereby reducing workload and thus saving time and money.
QUICK ENQUIRY
METERED FEED
- TURBO JET 8 & 10 (VS-2 Control)
- TURBO JET 8 & 10 (i-CON Control)
KEY FEATURES
Up to 10m working width
240 or 400 litre hopper
5m fused battery power cable and 5m connector and power cables
Agitator included as standard
Distribution/spreading kit included available as an option
Small or large seed and granular (e.g. Avadex) feed block kits available
VS-2 CONTROL
The VS-2 (Vari-Speed-2) is a simple, low cost method of metering seed and granules in proportion to a constant fixed forward speed.
Application rates are set by a combination of feed roller type and speed. Both can be changed on the move from the tractor seat using a simple dial control.
With optional GPS, the VS-2 can regulate the speed of the feed motor according to forward speed to maintain the selected application rate. This option has an audio visual alarm to alert the operator of any malfunction.
- Left hand toggle switch - calibrates to actual forward speed
- Middle toggle switch - main power on/off
- Right hand toggle - 3 positions (low 1-12, med 13-24 & high 25-36)
- Dial - positions 1 – 12
- Right hand toggle & dial - feed motor speed adjustment – 36 different motor speeds
- LED lights - indicate on/off status or problems with the fan/hopper level contents/feed motor/agitator as indicated
i-CON CONTROL
Rates are automatically controlled in proportion to forward speed for ultimate accuracy, and the machine can apply variable rates according to mapping data using a GPS based touch screen*.
*subject to unlock fee
- 4.3" colour touch screen with 4 basic menu keys
- Seed application rate kg/ha or seeds/m²
- Pre-start - ensures seed delivery begins as soon as the drill enters work
- Rate nudge – on the move adjustment in pre-set increments
- Forward speed km/hr
- Min/max forward speed indicator with alarms
- Metering unit status (on/off) and alarm
- Fan status (on/off) and alarm
- Hopper contents (kg) and low level alarm
- Part, full job and grand totals for area (ha), product dispensed (kg) and hours worked
- ISOBUS compatibility kit available
12v ELECTRIC FANS
Turbo Jet 8 VS-2 / Turbo Jet 10 VS-2
- Twin electric 12v electric fans
- Working width up to 8m
- High application rates at fast forward speeds
- Maximises capacity of 32mm seed pipe
- Easy access
- Mesh guard to protect against blockages from straw and chaff
DIGITAL BRUSHLESS 12v ELECTRIC FANS
Turbo Jet 8 i-CON / Turbo Jet 10 i-CON
- Twin digital brushless 12v electric fans, IP68 rated (water and dust resistant)
- Working width up to 10m
- Two stage soft start to smooth power requirement
- Anti-stall fans with self-diagnostic test
- Maximises capacity of 32mm seed pipe
- Easy access
- Mesh guard to protect against blockages from straw and chaff
WORKING WIDTH
Working width is largely determined by the type of fan and control system selected along with the type of product.
All VS-2 controlled models and the Turbo Jet 8 i-CON have a maximum working width of 8m.
The Turbo Jet 10 i-CON machines can spread up to 10m.
Whichever model is chosen the high-capacity electric fans ensure a reliable spread and the versatile feed mechanism easily adapts for different rates and products.
SEED HOSE
The internal diameter of the seed hose is 32mm, considerably greater than most alternatives. A wider diameter hose reduces back pressure and improves air flow, enabling higher application rates at higher forward speeds. A wider diameter hose also reduces the risk of blockages.
Y CONNECTORS
Each delivery hose can be split into two using Y connectors so, 8 outlets becomes 16 and 10 outlets becomes 20.
The number of hoses will depend on the product being applied, the implement width and type and the decision to broadcast or band sow.
OUTLET SPREADER PLATES
The robust design of the spreader plates prevents any distortion and ensures a consistent even spread pattern.
Outlets are securely attached to a mounting rail and seed hose and removable bottom plates allow both band and broadcast sowing.
Fluted feed rollers on a stainless steel shaft are driven by a 12 volt electric motor. All Turbo Jets are offered with small or large seed and granular (e.g. Avadex) feed block kits.
An agitator, powered by a separate electric motor is fitted inside the hopper base to prevent seeds bridging, and to ensure a constant flow of seed to the feed rollers.
The feed block is easily removed from the machine body. A variety of feed roller segments can be supplied, allowing multiple configurations, to suit a wide range of applications. They are easily changed as required.
SMALL SEED FEED BLOCK
Individual feed rolls for each outlet ensure accuracy down to very low rates.
Typically used for OSR, clover, mustard, turnips and slug pellets.
LARGE SEED FEED BLOCK
High capacity feed rollers are supplied to meter high rates of both large and small seeds.
Typically used for grass and cover crops at e.g. 40 kgs/ha at 6m wide at 12kph.
GRANULAR FEED BLOCK
Typically used for granular products e.g. Avadex.
PRECISE AND ACCURATE AVADEX APPLICATION
Managing and controlling grassweeds such as blackgrass continues to be a challenge for many farmers.
Although other control methods such as widening rotations, low-disturbance tillage, delayed Autumn drilling or ploughing every set number of years are common additional methods of control, applying blackgrass herbicides such as Avadex continues to be a strong weapon in the armoury.
Due to the Turbo Jet’s precision metring ability and the consistent, even spread pattern achieved from the spreader plates, this makes it an applicator of choice for applying Avadex, used by farmers and OE manufacturers, including Sky Agriculture. When working over 6m, the Turbo Jet 10 has a coefficient of variation (CV) of less than 5% (NSTS test carried out by SCS).
A key factor to consider when applying Avadex, is to have the applicator mounted correctly, which will allow for the best chance to combat blackgrass effectively. To learn more about the best way to mount an Avadex applicator to your Cambridge rolls or drill ahead of the next drilling season, click here.
TURBO JET 8 | TURBO JET 10 | |||
Control system | VS-2 | i-CON | VS-2 | i-CON |
Number of outlets | 8 | 8 | 10 | 10 |
Maximum working width | up to 8m | up to 8m | up to 8m | up to 10m |
Twin electric 12v fans | YES | - | YES | - |
Twin digital 12v brushless fans | - | YES | - | YES |
Colour touch screen control | - | YES | - | YES |
Hopper agitator | YES | YES | YES | YES |
Distribution/ spreading kit optional | YES | YES | YES | YES |
Calibration tray | YES | YES | YES | YES |
Hopper capacity (Litre) | 240/400 | 240/400 | 240/400 | 240/400 |
Small/large seed and granular (Avadex) feed blocks | YES | YES | YES | YES |
Maximum number of outlets | 16 | 16 | 20 | 20 |
Forward speed GPS | Option | YES | Option | YES |
Precision farming/ Variable rate | - | Option | - | Option |
In/out work sensor/switch | Option | YES | Option | YES |
Hopper level sensor | Option | YES | Option | YES |
Hopper cover | Option | Option | Option | Option |
Weight 240L (400L) approx. empty weight | 120kg (130kg) | 120kg (130kg) | 120kg (130kg) | 120kg (130kg) |
Dimensions 240L (400L) - W x D x H | 66 x 100 x 116 (143cm) | 66 x 100 x 116 (143cm) | 66 x 100 x 116 (143cm) | 66 x 100 x 116 (143cm) |
Paint to match machine | Option | Option | Option | Option |
Supplied with:
5m fused battery power cable and 6m connector cable are supplied as standard.
Power requirement:
12 volts DC – 20 amps.
*Avadex ® is a Trademark used under licence by Gowan Crop Protection Ltd
BUILT IN THE UK
Wisbech is still the home of Stocks Ag. All applicators are fabricated, assembled and painted in the Cambridgeshire factory. Precision assembly and quality control are paramount to the production process.
The R & D team work with both the factory and farmers to deliver a seeding solution that is fit for current farming practices.